Quote:
Originally Posted by Sergio
How many LiFePO4 cells do You have?
There is very little capacity above 3.6v (really 3.4v) so You don't need to charge to the limit.
If You have 14 cells, set the charger voltage to 50.4v or 49v for more conservative level (approximately 1% less capacity).
That VR2 should be the correct trim-pot if that charger follows the conventional functionality terminology found in other Lithium chargers.
|
I have 16 cells with a rated voltage of 3.2V and a charging limit voltage of 3.65V. So does 56V seem too safe?