View Single Post
Old 04-28-2016, 02:12 PM   #10
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
Default Re: Turf II Gas 2008 won't go move RG0833

Quote:
Originally Posted by GMAIL View Post
Ok Thanks! I pulled the black plug and still didn't start. Are the accelerator switch and fnr switches located in the dash and/or underneath the actual cart? I don't hear clicking when I press the gas pedal, but would the solenoid cause this issue or the micro switches?
You have two micro's in the ECB, and two micros mounted to the backside of the FNR shifter... that's all!

Yes... a bad solenoid could keep it from starting!
jump the two large lugs on the solenoid and see if the engine turns over,
BUT... before you go and replace it, you still need to see if power is getting to the solenoid,
(the other 3 microswitches work in conjunction to supply power to the solenoid)

Have you tested anything with a volt meter?
lockman1 is offline   Reply With Quote