[ojo]

Here's the discribtion of the self test:


Understanding the Power-up Sequence

The car will perform the following checks during the first
second of initial key - on.
• Electric brake check – Controller tries to rotate the motor
¼ turn in both directions.
• Reverse alarm check – Controller sounds the alarm for
100ms.
• Charger inhibit check – Controller checks the charge
receptacle for connection to the charger.
• Throttle switch check – Throttle switch must be open to
pass the start up test.
• Throttle position sensor – Controller checks the TPS for 0%
throttle.
• Throttle operation check – Controller checks the TPS for the
correct open and closed range.

The car will not run if the controller detects a problem
with any of the circuits above.