Buggies Gone Wild Golf Cart Forum - View Single Post

rusty · 09-12-2008, 10:32 PM

Yepper......... It sounds like the Solenoid is definately stuck in the "GO" position.

The contacts are probably burned closed in the solenoid. This is based on your saying about the pedal micro switch, works normal or opens and closes properly with the actuator. Also you disconnected the micro switch circuit and the motor still had power.

Replace solenoid with another 36 volt solenoid.

09-12-2008, 10:32 PM	#6
rusty Golf Cart Photographer Join Date: Jan 2007 Location: Wichita Falls Texas - My Ride 2010 Club Car Posts: 6,236	Re: Melex 252 Wiring Conern Yepper......... It sounds like the Solenoid is definately stuck in the "GO" position. The contacts are probably burned closed in the solenoid. This is based on your saying about the pedal micro switch, works normal or opens and closes properly with the actuator. Also you disconnected the micro switch circuit and the motor still had power. Replace solenoid with another 36 volt solenoid.