View Single Post
Old 06-29-2022, 06:07 PM   #29
mgray70
Gone Wild
 
mgray70's Avatar
E-Z-GO
 
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,535
Default Re: RXV Curtis Controller won't move

Quote:
Originally Posted by kgsc View Post
Well the picture I showed you is the adapter that allows you to use the freedom dongle with the new style square molex port. You could buy one of those and splice it in. Or just buy an ATX extension from Amazon and don’t worry about the colors except to make sure they match. Part number for the adapter is 647220. Another option would be to get the diagnostic port extension that ezgo uses with the 48txt carts. It is basically just an ATX extension to get the cable outside of the controller cover. Don’t know that part number
Thanks for your help! I'm gonna confirm that I have a good that the connections are good from the controller to the computer, and after that it would be safe to say that the controller would be bad as why it won't connect. Would you agree?

Sent from my SM-G991U using Tapatalk
mgray70 is offline   Reply With Quote