View Single Post
Old 08-10-2021, 03:40 PM   #2
Tom47
Gone Wild
 
Tom47's Avatar
Club Car
 
Join Date: Dec 2016
Location: Kingsland, Georgia
Posts: 1,825
Default Re: '99 Club Car DS ECO Battery Installation

Part 2: Additional photos:

Photo 1 shows the frame before removing the controller and solenoid mounting panel.

Photo 2 shows 1/8" aluminum diamond plate used to fill old battery spaces for mounting of charger, solenoid, controller, voltage reducer plus miscellaneous accessory wiring.

Photo 3 shows 9" x 13" baking pans used on top of diamond plate to raise components and hide mounting screws.

Photo 4 shows pan and plate stacking.

Photo 5 shows cleaned up frame. Looks much better!

Photo 6 shows diamond plate, pattern down, and the pans mounted in frame. Center plate is where the ECO battery is going whenever it arrives!

Photo 7 shows easy access to motor wiring with controller plate removed. By the way, the top screws for the controller plate are fun to remove without removing the rear seat and body. And sure is a pretty motor!

Photo 8 shows the frame and mounting plates painted grey enamel.

More photos will follow in several days or so.
Attached Images
File Type: jpg IMG_9155.jpg (153.7 KB, 0 views)
File Type: jpg IMG_9159.jpg (172.4 KB, 0 views)
File Type: jpg IMG_9162.jpg (156.0 KB, 0 views)
Tom47 is offline   Reply With Quote