Quote:
Originally Posted by foxdelke
Thanks Jon. I'm relying on oil pump as opposed to premix. Using amsoil. Do you suggest disconnecting pump works and going to 1:128 or 1 oz/gal premix. I'm sure oil injection system is operating as I watch oil tank where I have placed a dot. Compression is 135 psi cold. Faint sign of gasketed areas moisture on block, nothing wet though. No hissing noises. I'll check and tighten block bolts, carb/fuel pump nuts. Once original gasket areas are broken, do you recomend silicone gasket maker? I know 2 strokes need to be tight in crank area..
|
I would be inclined to run premix over the oil pump, that way you know for sure it's getting the oil it needs, but thats up to you. I thought 1:128 is 1 oz/gal, this is recomended for light use such as playing golf I believe for heavy use it's 1.5oz to 1 gal.
I never use use silicone gasket maker so I can't say if it would work or not.