Buggies Gone Wild Golf Cart Forum - View Single Post

on_the_fly · 02-03-2011, 08:17 PM

i added a lift today to my cart. i made the lift myself and i droped the front of the motor to help keep it at the factory angle for oil flow but noticed now my air intake tube is about half flat against the black box beside the air box. has anyone else had to deal with this, do i need to relocate that box, or is there a hose made to adapt around this issue, i havent had that box apart to look and see if i could notch it out some way. just looking for some thoughts. o and the lift is 7 and a half inches and i dropped the front of the motor 3. this with fatcory tires put my floor board at 19 inches off the ground. and im looking to run 23x11x10's just havent bought them yet.

02-03-2011, 08:17 PM	#1
on_the_fly Gone Wild Join Date: Dec 2010 Location: centural kentucky Posts: 241	breather question on my cc i added a lift today to my cart. i made the lift myself and i droped the front of the motor to help keep it at the factory angle for oil flow but noticed now my air intake tube is about half flat against the black box beside the air box. has anyone else had to deal with this, do i need to relocate that box, or is there a hose made to adapt around this issue, i havent had that box apart to look and see if i could notch it out some way. just looking for some thoughts. o and the lift is 7 and a half inches and i dropped the front of the motor 3. this with fatcory tires put my floor board at 19 inches off the ground. and im looking to run 23x11x10's just havent bought them yet.