View Single Post
Old 07-13-2022, 09:01 AM   #30
bronsonj
Gone Wild
 
bronsonj's Avatar
E-Z-GO
 
Join Date: Jan 2013
Location: Saint Petersburg, FL
Posts: 2,089
Default Re: 86 Marthon Build Log

Quote:
Originally Posted by five5cooks View Post
where would be the best place to mount the 202 and controller and feel like the area just above the motor looks like it should work. It is out of the way but still fairly accessible while keeping wire runs fairly short. Any thoughts on pros or cons for this location?
It will likely be fine, but I do know that if you go slow a lot or tow anything or fight hills in the cart the motor can get quite hot. I ended up putting in a some fans to blow on the motor when I need to abuse it... I bought four 12v fans so they'd run off my pack. They worked incredibly well... I thought it was not going to be anywhere near as effective, but it worked great.

If you don't plan on abusing the cart then I see no issue with that location provided there is enough space there when the cart is loaded down and the springs compressed.

If you do plan on abusing it then you may want to consider increasing air circulation in that somewhat confined space.
bronsonj is offline   Reply With Quote