View Single Post
Old 08-21-2022, 05:11 PM   #1704
notspam
Not Yet Wild
 
notspam's Avatar
E-Z-GO
 
Join Date: May 2020
Location: Midwest
Posts: 23
Default Re: Programming Curtis Controller

So, as far as maintaining a speed less than max, fstop and I figured out that you can increase the "throttle max" parameter allowing you more usable pedal travel. The stock throttle max is 2.5V. This gives you max throttle after the pedal is pushed a little over half way. Using 3.13V, max throttle occurs when the pedal is all the way down. This means that it takes more pedal movement to influence the speed. More control. Maybe this helps others too.
notspam is offline   Reply With Quote