Quote:
Originally Posted by Mooncarter
Everybody does this differently. Clean the heck out of the surface. Sand it a bit. Shoot primer on it. Fix any imperfections you would like to fix. Primer it again. Sand that. Wipe it down with solvent of your choice. Paint it with paint of your choice. Clear coat it with clear of your choice if that works with what you are doing. Opinions are all over the map. If you do the above I see no need for adhesion promoter. Just my 2 cents.
|
Thanks.
I ended up using dupli-color, and washed, sanded, de-greased, tack cloth, adhesion promoter, sandable primer, primer (sanded after), primer sealer, base coat, clear coat.
i went way OTT but was just wanting to not have to redo again if it went wrong.
Some sample shots:
IMG_9621.jpg
IMG_9579.jpg
I'm in middle of a lithium conversion so not all put back together yet, but painting done, and the colors seem good. Have a new black roof to go on top too.
The two colors i went for was Ocean Blue Metal Specks -
https://www.amazon.com/Dupli-Color-M...6153498&sr=8-1
and Metal Specks Sparkle Silver -
https://www.amazon.com/Dupli-Color-M...98&sr=8-1&th=1