Buggies Gone Wild Golf Cart Forum - View Single Post

jonr3 · 07-02-2016, 05:15 PM

BATTERY TRAY -

The original battery tray and the electronics panel were completely rusted and the battery was going to fall through at any time.

While I was recuperating from surgery and bored out of my mind, I decided to make a new one.

I used 1.5" angle iron for the frame and a piece of aluminum diamond plate for the bottom. I welded the tray directly to the frame and spent a long time smoothing out the welds with a grinder because apparently I can't weld worth a crap with my left hand.

07-02-2016, 05:15 PM	#3
jonr3 Gone Wild Join Date: Jan 2016 Location: Hickory, NC Posts: 702	Re: 1976 Model D Complete Rebuild Thread BATTERY TRAY - The original battery tray and the electronics panel were completely rusted and the battery was going to fall through at any time. While I was recuperating from surgery and bored out of my mind, I decided to make a new one. I used 1.5" angle iron for the frame and a piece of aluminum diamond plate for the bottom. I welded the tray directly to the frame and spent a long time smoothing out the welds with a grinder because apparently I can't weld worth a crap with my left hand.