Buggies Gone Wild Golf Cart Forum - View Single Post - Pre MCI ignition and MCI ignition parts compatibility

bwood · 01-14-2015, 09:14 AM

I ran my 2003 TXT pre MCI engine out of oil and locked up one rod on the crankshaft...broke the rod and ruined the crank. I rebuilt a MCI engine to replace it and this is where the problems began...
It will start but not run very well, it really doesn't run well enough to say it runs. Checked and cleaned carburetor, checked timing marks, readjusted valves, checked pulsar coil resistance and replaced ignitor.
At this point my question is, are the pulsar coil from the MCI engine and the ignitor from the pre MCI engine compatible?

Thanks,
Brandon

01-14-2015, 09:14 AM	#1
bwood Not Yet Wild Join Date: Jul 2010 Posts: 1	Pre MCI ignition and MCI ignition parts compatibility I ran my 2003 TXT pre MCI engine out of oil and locked up one rod on the crankshaft...broke the rod and ruined the crank. I rebuilt a MCI engine to replace it and this is where the problems began... It will start but not run very well, it really doesn't run well enough to say it runs. Checked and cleaned carburetor, checked timing marks, readjusted valves, checked pulsar coil resistance and replaced ignitor. At this point my question is, are the pulsar coil from the MCI engine and the ignitor from the pre MCI engine compatible? Thanks, Brandon
bwood Not Yet Wild Join Date: Jul 2010 Posts: 1