Thread: Input shaft seal replacement on a 2005 350cc
View Single Post
Old 02-25-2009, 12:23 AM   #8
CC-John
prop. A$$hole's Garage
 
CC-John's Avatar
 
Join Date: Dec 2007
Location: Deep inside the Central Scrutinizer (77096)
Posts: 1,587
Default Re: Input shaft seal replacement on a 2005 350cc
Quote:
Originally Posted by pizzamaker View Post
take a flat screwdriver and put it under the lip of the seal, with the screwdriver laying flat on the seal push down on the handle, the longer the screwdriver the better. you my need to keep moving and prying t'il it comes out.


Also before installing the new seal, cover the splines on the input shaft with tape.. This will keep the sharp edges of the splines from nicking the lip of the new seal..
CC-John is offline   Reply With Quote