Quote:
Originally Posted by fcbclan
How difficult, and what is the procedure to replace crankshaft seals. I have 45 psi compression both directions and a strange compression leak sound.
|
Well with 45psi of compression, you need to do an overhaul on the top end. Either a complete top end kit, or go with an oversized pistion and get the jug rebored.
And it being a 85, and if its never been serviced, then yea, it would be time to replace the crank seals.. Doing the clutch side seals is not a bad job, but the flywheel side can be very fun!.