PDS cart battery cable lengths FYI
Previously having installed 4 gauge cables on across my battery pack, I decided to replace three additional stock 6 gauge cables with 4 gauge over the weekend.
Since PDS carts already have two 4 gauge cables running from the controller and solenoid to the motor (don't need 4 gauge for the field connections), the only cables left to replace were the two that run from the pack to the controller/solenoid and one from the controller to the solenoid.
Having searched unsuccessfully for cable lengths before for my cart, I wanted to share what I found by measuring the stock 6 gauge cables I removed from my cart (2005 Ez-go PDS).
Pack negative to controller B-: 32"
Pack positive to solenoid: 28.25"
Controller A1 to solenoid: 9"
Hope this helps someone wanting to fabricate their own cables.
|