Buggies Gone Wild Golf Cart Forum - View Single Post - 48v Ezgo Shuttle... solenoid, to fuse, to resistor to contactor ??

bronsonj · 09-08-2021, 10:16 AM

- Solenoid - Get the 48V SW180 or SW200 from Scotty.
The good solenoids are polarity specific, so read the directions. Not hard, just something to note.
https://www.cartsunlimited.net/solenoids.html

- Fuse Holder - A 400 amp fuse is fine. They are slow-blow fuses too. I have a fuse but no fuse holder... One side of my fuse is bolted to the terminal of the battery and the other side is bolted to the high current cable. Doesn't matter if you put it on the + or - side.

- 48v Contactor - I have no idea.

- Little Resistor - Scroll down further on the same page as the solenoids and Scotty has the appropriately sized resistors.

09-08-2021, 10:16 AM	#5
bronsonj Gone Wild Join Date: Jan 2013 Location: Saint Petersburg, FL Posts: 2,089	Re: Help please - 48v Ezgo Shuttle... solenoid, to fuse, to resistor to contactor ?? - Solenoid - Get the 48V SW180 or SW200 from Scotty. The good solenoids are polarity specific, so read the directions. Not hard, just something to note. https://www.cartsunlimited.net/solenoids.html - Fuse Holder - A 400 amp fuse is fine. They are slow-blow fuses too. I have a fuse but no fuse holder... One side of my fuse is bolted to the terminal of the battery and the other side is bolted to the high current cable. Doesn't matter if you put it on the + or - side. - 48v Contactor - I have no idea. - Little Resistor - Scroll down further on the same page as the solenoids and Scotty has the appropriately sized resistors.