Quote:
Originally Posted by ThreeCW
Your photos are too small to see what is going on with your wiring ... perhaps repost the original separate photos.
Are you getting activation voltage across the two small post of the solenoid when you turn your key switch on and push the accelerator? With the key switch off or no accelerator pedal, there should be no voltage across the two small posts. With the switch on and the accelerator pushed, you should see activation voltage (36 volt or what ever your cart is wired for).
Also check from each large solenoid post to your battery pack main negative for voltage with the key switch on and the key switch off and accelerator pedal pushed.
|
So I tested voltage on the small posts, key turned on, in F and pushed accelerator...got ZERO volts...so nothing is getting to the solenoid. Not sure what would have changed