well.. old mec... i thought i had it all done.. but it still doesnt work... so maybe you can help me... i took a few pics of everything... my wire colors are as follows (this is how they were set up originally):
Red-front blinker
Green-front blinker
Black-ground
Black-(not the ground black) rear blinker
Gray-rear blinker
Blue-to flasher
yellow-to flasher
gray with black stripe...i dont know what that is.. i thought power... put that just puts the lights on...
now i dont have a 3 pronged flasher... i have 2 singular flashers with 2 prongs each. i figured i could hook one up for the lefts... like one to the blue wire. and then one to the yellow wire.
can i do that.. and do i put the ground to the flashers or power... my original setup when i got it had the ground coming off the flasher. but the diagram i was looking off of that you sent old mec has the power. im at a loss here... i have no idea what i should do at this point.. take a look and let me know what you think...
this last one is the flasher plug... which id like to redo... using 2 flashers... but any help would be appreciated..