Re: Acceleration Issue - 2010 Emerge
Thanks very much for your response. I can confirm that it isn't the accelerator assembly because I swapped that out with one I bought on eBay for a real good price and the problem was still there. I've also checked the motor speed sensor and it reads the voltage fine.
I haven't seen any codes down in the area where it indicates charging level. I'm not aware of any other place to look for codes.
I downloaded a copy of the eMerge manual and it doesn't give any clues of where to go from here. If you know where I can find a wiring diagram of the Controller please let me know where to look.
My suspicion now is that the sensor which senses if the cart is rolling backward on a slope and such is bad in that it has become too sensitive.
Last, if you know of anyone who repairs Controllers please let me know.
Thanks again for responding.
|