Quote:
Originally Posted by nitro1
Wow your not kidding, I’ll wait till I have everything else done to look into that carb/kit
|
I did it on the cheap the first go, used a Performance 670 intake and a used Yamaha Grizzly 660 atv carb. It actually ran very well but the carb was just too large or jetted to fat, it was a 42mm Mikuni CV, it's in my thread, I bumped it for you. A Mikuni slide carb can be had for less than $150, if you get the VM style I can get you pretty close on the jetting if you use a 34mm. The throttle cable will need some work, I had to make a bell crank device to equal out the pedal travel issue to match the carb, pretty simple actually.
https://www.buggiesgonewild.com/showthread.php?t=156542