Buggies Gone Wild Golf Cart Forum - View Single Post - Yamaha G8 Club

stuff4mason · 06-08-2011, 04:15 PM

Cajun, While you got the motor out, if it were me, I'd take EVERYTHING off the frame, pressure wash the sh*t out of it, inspect all joints, etc. for good welds, throw a bead of weld where needed, then prime and repaint the whole thing.

Now that I got mine all back together, I wished I had done this. Besides, it gives you the chance to check everything you take apart, and put back together again, to make sure everything is good. I know its a pain, but I think totally worth the effort!

Glad your clutch came off easy! I really enjoyed working on that peice. Be sure not to breath in that black dust in the starter/generator, its nasty stuff!

06-08-2011, 04:15 PM	#14
stuff4mason G8 Club Founding Member Join Date: Sep 2010 Location: Middle of Virginia, USA Posts: 4,265	Re: Yamaha G8 Club - Please post! Cajun, While you got the motor out, if it were me, I'd take EVERYTHING off the frame, pressure wash the sh*t out of it, inspect all joints, etc. for good welds, throw a bead of weld where needed, then prime and repaint the whole thing. Now that I got mine all back together, I wished I had done this. Besides, it gives you the chance to check everything you take apart, and put back together again, to make sure everything is good. I know its a pain, but I think totally worth the effort! Glad your clutch came off easy! I really enjoyed working on that peice. Be sure not to breath in that black dust in the starter/generator, its nasty stuff!