Quote:
Originally Posted by Monsterezgokid
we are still workin on it..  |
Right, apparently it is a normal rs-232 serial interface. Just the 3 wires to connect, but some other wires have to be shorted at the PC end. Its 9600bps.
The wires to short are the handshaking ones shown here:
http://www.daniel-hertrich.de/rs232/#sercab
4,6,1 shorted together
7,8 shorted
The official cable contains a chip which is an opto isolator. This protects the PC serial port if the controller is broken.
So, who has the time to test this??