View Single Post
Old 12-14-2015, 09:09 AM   #6
cheapjeep2
Gone Wild
 
cheapjeep2's Avatar
Club Car
 
Join Date: Nov 2008
Location: Peachtree City, Georgia
Posts: 1,546
Default Re: LED lights fried?

Quote:
Originally Posted by Dsouthw524 View Post
The lights are usually rated for 12 Volt. They will take a slight voltage above that. I know that you can either use a voltage reucer or you can install a resister in the positive lead to reduce the input voltage. I have done this for some instalations with great success. The value needed is able to be determined by using a volt meter and resister to get the voltage down to around the 12 volt range (12-13V).

Hope this helps!
Don't you have problems with the resistor getting hot?
cheapjeep2 is offline   Reply With Quote