Buggies Gone Wild Golf Cart Forum - View Single Post

Free Spirit · 11-15-2010, 03:15 PM

Not familiar with the thread or the vglide pot in specific, but if the pot has 3 connection tabs on it (A, B, and C) and has wires on 2 of the three (A and B) you should be able to reverse the resistance by using the center tab and the currently unused tab (B and C). The tabs aren't going to have the labels in the example. Best bet is to use a multi-meter and see if the resistance runs the way you want it. (Hope this helps more than it confuses)

11-15-2010, 03:15 PM	#2
Free Spirit Gone Wild Join Date: Nov 2009 Location: Pennsylvania Posts: 167	Re: reversing pot box resistance Not familiar with the thread or the vglide pot in specific, but if the pot has 3 connection tabs on it (A, B, and C) and has wires on 2 of the three (A and B) you should be able to reverse the resistance by using the center tab and the currently unused tab (B and C). The tabs aren't going to have the labels in the example. Best bet is to use a multi-meter and see if the resistance runs the way you want it. (Hope this helps more than it confuses)