Buggies Gone Wild Golf Cart Forum - View Single Post

Xtsix · 07-09-2017, 04:51 PM

Is it an l70 with the 3/4 shaft and taper at the end? I made a 1" adapter to slide over the shaft, and welded it in place, then cut the keyway in on my mill, but it could be done with a dremel

07-09-2017, 04:51 PM	#3
Xtsix Not Yet Wild Join Date: Aug 2014 Posts: 14	Re: Yanmar swap Is it an l70 with the 3/4 shaft and taper at the end? I made a 1" adapter to slide over the shaft, and welded it in place, then cut the keyway in on my mill, but it could be done with a dremel
Xtsix Not Yet Wild Join Date: Aug 2014 Posts: 14