Buggies Gone Wild Golf Cart Forum - View Single Post - Ezgo dcs solenoid clicks but wont disengage and wont move

scottyb · 11-19-2013, 10:20 AM

Agreed - the test shows the control worked properly once but, failed to repeat until the control was rebooted. Throttle input issues can cause this type of failure. But so can control failures.
You might want to disconnect the solenoid activation wires and activate the solenoid manually from an independent source (jumper wires from main pack) just to verify the solenoid engages and disengages properly repeatedly when asked to do so.

11-19-2013, 10:20 AM	#8
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Ezgo dcs solenoid clicks but wont disengage and wont move Agreed - the test shows the control worked properly once but, failed to repeat until the control was rebooted. Throttle input issues can cause this type of failure. But so can control failures. You might want to disconnect the solenoid activation wires and activate the solenoid manually from an independent source (jumper wires from main pack) just to verify the solenoid engages and disengages properly repeatedly when asked to do so.