Buggies Gone Wild Golf Cart Forum - View Single Post

cart around · 04-14-2018, 11:19 AM

You have a 3-pg 2 stroke.

I believe that your belt goes front to back, which means your clutches are sideways.

The drive clutch is attached to the engine.
The plate closest to the engine is part of the starter pulley. It should not move.
The big cup should move easily by hand. Yours sounds like it is ok.

When the engine spins, they close together, and the belt rides all the way to the top.

The driven clutch is attached to the axle. You should not be able to squeeze those plates together.

You should have no wobble on the driven clutch. I did not understand what you were trying to say about the driven clutch.

HOW WIDE IS YOUR BELT?

04-14-2018, 11:19 AM	#14
cart around Test before replacing Join Date: Aug 2013 Location: Ohio side of the Pennsylvania border. Posts: 3,496	Re: 2 stroke gas ezgo 1990 sluggish no power You have a 3-pg 2 stroke. I believe that your belt goes front to back, which means your clutches are sideways. The drive clutch is attached to the engine. The plate closest to the engine is part of the starter pulley. It should not move. The big cup should move easily by hand. Yours sounds like it is ok. When the engine spins, they close together, and the belt rides all the way to the top. The driven clutch is attached to the axle. You should not be able to squeeze those plates together. You should have no wobble on the driven clutch. I did not understand what you were trying to say about the driven clutch. HOW WIDE IS YOUR BELT?