Quote:
Originally Posted by Frenchie2958@live.com
I have replaced fuel pump fuel lines and carburetor. I had to replace needle and seat in new carburetor because it was flooding (no rubber on needle valve) cart runs but very sluggish should I clean new carb or check reed valves? R the reed valves something I can clean or is strictly remove and replace my phone# 248 431 4144 mike (frustrated). Mixed fuel at 100 to 1 as instruted
|
Would some one plz answer my questions on my clutch issues question 1 when I take belt off cart should I be able to easily push drive clutch main housing twards motor? 2 question my cart is sticking in high gear and not moving to a lower gear when it’s under a load ( such as driving up a small incline) my belt is measuring 11/8, do I need to replace drive clutch or driven clutch or both? When I put cart on blocks I can see front clutch closing all the way (belt comes to top), rear clutch opens and belt is at bottom of rear clutch