Here's what I found on this site, relative to my situation:
http://www.buggiesgonewild.com/ezgo-...-clutch-3.html
I'm assuming post #26 is my answer, as this clutch assembly is pressed on to the shaft of the motor.
3/4" wide bolt with a small slug rod to force it off, I can see that working.
Am I going to have to angle the axle down, lift the motor up to get this assembly off? I'm hoping not to do anything more but it's right up against the axle.
I found this
http://shopezgo.com/products/Drive-C...roduct_id=1772
but the problem is it doesn't match the pictures that are in the thread above in clutch replacement, along with the time frames they are stating.
My model is coming back at KO685, which I would assume 1985 EZGO golf cart.
I punched my serial # into that website and came back with nothing, so I filled out a form for someone to contact me regarding the clarification of this cart.