Re: 85 Club car belt slipping problem.
I have found this much out..
When the cart is put in service mode and ran in neutral there is no problem(clutches engage and disengage properly) . But then again the cart never squealed when it wasn't under a load such as an uphill start. So when putting it underload the source of the squeal is coming from what appears the primary engine clutch. The belt does not appear to be slipping but a squeal is coming from the clutch.
The belt i replaced the old one with seems too fit fine.. its a 6013 napa brand belt. Does this mean that my clutch is wore out??
Thanks for the replies and lmk what you guys think.
|