Quote:
Originally Posted by cartdoc1969
If the cart jumps during the startup test, it has a bad brake. One of the startup tests is the controller will try to rotate the motor 1/4 turn in each direction. If the controller sees any movement during the brake test it will fail and not allow the cart to run. You can pull the brake and disassemble it. Clean the parts and see if that helps. Make sure not to over tighten the mounting bolts. Only tighten the three mounting bolts just enough to flatten the lock washers.
|
That's exactly what it's doing! Thanks!
Sent from my SM-G991U using Tapatalk