Buggies Gone Wild Golf Cart Forum - View Single Post

kyerik · 11-12-2012, 04:31 PM

Try a new spark plug. Perhaps there is a conductive coating on the center electrode insulator that is allowing the voltage to go to ground sometimes without jumping the gap.

If that doesn't work, then you might try the HEI conversion. I was having some strange intermittent spark issues and the HEI coil and ignition module swap cured them. Some people get 150 ohms on a working pulsar.

11-12-2012, 04:31 PM	#2
kyerik Gone Wild Join Date: Aug 2012 Location: South central IL Posts: 287	Re: Hard Starting 1989 2 stroke EZGO Try a new spark plug. Perhaps there is a conductive coating on the center electrode insulator that is allowing the voltage to go to ground sometimes without jumping the gap. If that doesn't work, then you might try the HEI conversion. I was having some strange intermittent spark issues and the HEI coil and ignition module swap cured them. Some people get 150 ohms on a working pulsar.