Buggies Gone Wild Golf Cart Forum - View Single Post

JohnnieB · 03-12-2016, 04:24 PM

Both the stock DCS and the DCX controllers default to forward and have to be told to go into reverse.

Voltage on Pin-4 (Orange wire) of the 10 pin plug is what tells them to go into reverse, so check for voltage there when in Forward or Neutral.

If it is much above 0V when not in Reverse, the DCX may be more sensitive at Pin-4 than the stock DCS is.

03-12-2016, 04:24 PM	#3
JohnnieB Techno-Nerd Join Date: Jun 2011 Location: West Virginia Posts: 19,654	Re: DCX400 fwd/rev issues Both the stock DCS and the DCX controllers default to forward and have to be told to go into reverse. Voltage on Pin-4 (Orange wire) of the 10 pin plug is what tells them to go into reverse, so check for voltage there when in Forward or Neutral. If it is much above 0V when not in Reverse, the DCX may be more sensitive at Pin-4 than the stock DCS is.