The one you said to use in my which switch wire to cut. Lol
Quote:
Originally Posted by yurtle
Here's how to connect the reducer you have now.
NOTE: You don't want to "burn the fuse".
Still cracking up over, "DC/DC Buck Transformer". As opposed to a DC/DC Boost Transformer.
EDIT:
If you choose to go this route, allow me to update the diagram first. The relay and reducer negative need to go directly to the pack negative, not tapped as my drawing indicates. Also, the relay coil positive needs to go to the solenoid post, not tapped as drawing indicates.
This is a quick "before coffee" sketch, that needs some tweaking. Other suggestions welcome.
|