Zeva BMS settings for 72v
I asked this before, but it got overlooked because I was having other issues. I would appreciate any advice you would be willing to share. I need to set my BMS settings and don't know what some of it is, don't really know what is the best options for some of the things I do know.
This is for 10 Leaf Modules on a 72V cart that I would prefer to keep under 82V total.
Pack Capacity Amp Hours
Soc Warning
Full Voltage
Warn Current
Trip Current
EVMS temp warning
Min Isolation
Tacho PPR (not sure what to do with these that obviously don't apply)
Fuel Gauge ones and Temp gauge as well
BMS Min V
BMS Max V
Balance Threshold
BMS Hysteresis
BMS Min and Max temp
Low Temp Chg Rest. (yes or no)
Max Charge V
Max Charge Current
Alt Charge V
Alt Charge Current
Enable Precharge (yes or no)
Stationary Mode (yes or no)
I know thats a lot of parameters, but I appreciate any suggestions on those and any others that I didn't list. Thanks
|