Quote:
Originally Posted by hot-shot
Okay went back and tested the first two items. A1 to A2 on the lowest setting the meter read OL with pedal pressed. Went b+ on controller to A1 on the motor with out pedal pressed had a 32.3. With pedal pressed it went to OL
|
Never, ever, REPEAT - NEVER, apply voltage to an Ohmmeter.
The Ohmmeter supplies its own voltage and if an external voltage is applied, it can burn out the meter, or if you are lucky, just screw up the calibration. If you are extremely lucky, the Ohmmeter may have been protected from gross errors such as that.