Buggies Gone Wild Golf Cart Forum - View Single Post

BBBHC · 04-28-2019, 08:31 PM

I had about zero electrical knowledge when I started my build. The Alltrax install was easy for me. If you triple checked your wiring, and not getting any life, I'd bet it's either the solenoid or controller that is a problem.

Plugging the controller in will at least get you started to troubleshoot. Since we have different makes of carts there might be some differences.

Make sure you do not let the printer cable touch anything when plugged into the controller. That would void the warranty if it were to short out. Maybe post some pictures of your wiring as well if you can. Someone on here will be able to help if there is anything not related to a faulty part.

04-28-2019, 08:31 PM	#8
BBBHC Gone Wild Join Date: Jul 2018 Location: Central Ohio Posts: 1,720	Re: Yamaha G29 controller and motor upgrade I had about zero electrical knowledge when I started my build. The Alltrax install was easy for me. If you triple checked your wiring, and not getting any life, I'd bet it's either the solenoid or controller that is a problem. Plugging the controller in will at least get you started to troubleshoot. Since we have different makes of carts there might be some differences. Make sure you do not let the printer cable touch anything when plugged into the controller. That would void the warranty if it were to short out. Maybe post some pictures of your wiring as well if you can. Someone on here will be able to help if there is anything not related to a faulty part.