Buggies Gone Wild Golf Cart Forum - View Single Post

jacc306 · 03-21-2011, 04:21 PM

Still working on the solid state conversion. Got a Curtis 1204, 275 amp controller and the pb 6 pot box. Thanks Smallblock for the Hyundai idea that was a HUGE help! the diagams are identical aside from the Hyundai having the controller. It seems the closer I get the more questions I have. Now I'm not sure about the electronics on the solinoid or even if they're needed. The Hyundai diagram shows a 3A 100v diode across the solinoids coil leads and a 205ohm 5w resistor across the contact leads. I can't find what controller was used by Hyundai. The Curtis diagram shows a 'optional precharge resistor', does anyone know what the purpose is and what, if any configuation I will need? Thanks again folks.

03-21-2011, 04:21 PM	#1
jacc306 Not Yet Wild Join Date: Jan 2011 Location: Ohio Posts: 20	G2 solid state conversion Still working on the solid state conversion. Got a Curtis 1204, 275 amp controller and the pb 6 pot box. Thanks Smallblock for the Hyundai idea that was a HUGE help! the diagams are identical aside from the Hyundai having the controller. It seems the closer I get the more questions I have. Now I'm not sure about the electronics on the solinoid or even if they're needed. The Hyundai diagram shows a 3A 100v diode across the solinoids coil leads and a 205ohm 5w resistor across the contact leads. I can't find what controller was used by Hyundai. The Curtis diagram shows a 'optional precharge resistor', does anyone know what the purpose is and what, if any configuation I will need? Thanks again folks.