Quote:
Originally Posted by KillerCC
A lot of times when the work you did has been done, usually if you add some pressure into the gas tank, everything will work fine. Usually I use a blow gun and shoot some small puffs of air into the tank fill opening while holding my hand over it to help keep the pressure from escaping. Do this while some one is trying to start it and it should work. Good luck!
|
That would probably work to get it started initially, but I don't want to be doing that during every cold start
Once she's started and warms up for a minute or so, the fuel flows fine and I can stop and start with ease, but during cold starts, it seems to take forever to get the fuel flowing