|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
08-06-2020, 03:50 PM | #1 |
Getting Wild
Join Date: Jun 2014
Posts: 77
|
RXV input shaft bearing
Is there a write up of any sort, with pictures and instructions and/or with the part numbers for what’s needed? I’ve got a “grinding” type noise whenever I let off the throttle, have already changed rear end fluid with the friction modifier and no change. Not sure what else it can be.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-06-2020, 05:42 PM | #2 |
Getting Wild
Join Date: Mar 2019
Location: NC
Posts: 92
|
Re: RXV input shaft bearing
Parts schematics: https://shop.txtsv.com/vehicle/index...m_content=cta#
Service Manual: https://www.ezgo.com.au/files/4998/6...r%20Manual.pdf |
08-06-2020, 06:58 PM | #3 | |
Getting Wild
Join Date: Jun 2014
Posts: 77
|
Re: RXV input shaft bearing
Quote:
Thanks! |
|
08-06-2020, 07:30 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV input shaft bearing
The bearings are marked with a "6000 series number" and the local auto parts store can get them with that number. (Cheaper than ezgos prices too).
|
08-06-2020, 08:44 PM | #5 |
Getting Wild
Join Date: Jun 2014
Posts: 77
|
Re: RXV input shaft bearing
|
08-06-2020, 11:13 PM | #6 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: RXV input shaft bearing
Removing & installing the input shaft is generally easy. The bearings are pressed on, so access to a press is just about required.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G9 Input Shaft Bearing | Gas Yamaha | |||
EZGO Rear differential input shaft nut crimped? how to remove input shaft?! | Gas EZGO | |||
Input shaft bearing kit question | Electric Yamaha | |||
G16 trans parts? where to get input shaft bearing, etc | Gas Yamaha |