|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-29-2020, 01:34 PM
|
#11 |
|
Gone Wild
 Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
|
Re: cart won't run
I agree jb is the man but my two cents. Flip the cart to tow and check your switches at the harness. Pull plug j4 and check for continuity across red and green with the pedal pushed. If yes your pedal switch is good. Now pull plug j1. Check pins 8 and 9 for continuity with the key on. If yes key switch is good. Now pin 1-3 for forward and 1-2 for reverse. Now check pin 4 and 5 for pack voltage. I would also check the run tow switch for continuity across the appropriate wires. Make sure to put it back on tow before you plug it back in.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-29-2020, 01:36 PM
|
#12 |
|
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: cart won't run
I was sending this as kg was apparently..... follow his advice not mine lol
Looks to me like you should check: (black probe on main negative on battery pack) Red probe on: Red/white wire at tow run switch voltage? If no bad reed switch. If yes, Check Orange/red at tow run: voltage? If no, bad tow/run. If yes, check: Green wire at f/r switch when switch is in forward. Voltage? If no: bad bad f/r switch. If yes, and there is no power at key switch.... looks like something is faulting inside controller. |
|
|
|
|
08-29-2020, 01:42 PM
|
#13 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 70
|
Re: cart won't run
No I do not, it would be nice to try one. If it sounds like that might be the issue I can go get one & try it. Thanks,
|
|
|
|
|
08-29-2020, 01:49 PM
|
#14 | |
|
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: cart won't run
Quote:
|
|
|
|
|
|
08-29-2020, 01:50 PM
|
#15 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 70
|
Re: cart won't run
#9 has 1.9v & #8 has 0v.
|
|
|
|
|
08-29-2020, 01:51 PM
|
#16 | |
|
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,141
|
Re: cart won't run
Quote:
|
|
|
|
|
|
08-29-2020, 01:52 PM
|
#17 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 70
|
Re: cart won't run
it was working when parked. Then charger was connected. Hasn't run since. How do I check the reed switch? My small black wire has never been connected at the charger port on the cart. Thx
|
|
|
|
|
08-29-2020, 01:57 PM
|
#18 | |
|
Gone Wild
Join Date: Jul 2012
Posts: 527
|
Re: cart won't run
Quote:
|
|
|
|
|
|
08-29-2020, 02:10 PM
|
#19 | |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 70
|
Re: cart won't run
Quote:
With tow switch in run position I have pack voltage on the tow/run wires red, white & orange. With the switch in tow mode I have only 29v on white wire. I do have voltage on the green wire at f/r switch when in f or r. |
|
|
|
|
|
08-29-2020, 02:14 PM
|
#20 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 70
|
Re: cart won't run
[QUOTE=georgia088;1755163]Do you have voltage on pin 4 and 5 on the j1 connector of controller?[ .6v on 4 & 20v on 5./QUOTE]
|
|
|
|
|
|
||||||
|
|
Linear Mode
