kicker pxi50.2 install help

[Bull203]

Hey guys,
Quick question involving my kicker pxi50.2 install. If there is anyone that has installed this and can give me some quick pointers on where the wires go, I would appreciate it. I have a bussman fusebox under the hood and the amp will mount in this recess as well.
In most cases, I have done all the paint and body and my father in law completed the wiring and electrical on the rebuild of this cart. But he is out of town for the week and Im trying to lock this up before the weekend. I have no issue completing it if I know where the wires go....Can someone help?

[Bull203]

Okay, leT me try to update this after the overwhelming response to my first post..lol
I have installed the unit, mounted it in the space behind the cup holders. I have ran the speaker wires and the remote wire. Installed the iPod wire as well. The last 4 wires are the red, yellow, black and blue. I have a busmann fuse box installed, can someone help me with these last four wires.

[LVCJ]

Hey Bull.....I have not installed one myself, but try this:

http://www.kicker.com/sites/default/...%20Rev%20J.pdf



yellow = +12v
black = ground
red = 12v ignition
blue = remote out

I would Goggle some info about that Kicker.....there is some certain ways of which wires to hook up first and what to be careful of so as not to hurt anything.

[ronncat]

I have that head unit in my cart a well. In my case I used the RCA outs to power an external power amp. When the radio was turned on and the cart controller was on I experienced a high pitched whine. Grounding the POS RCAs from the head unit to -12V took care of that problem. Just in case you have the same issue

P.S. That unit along with a powered sub and my speakers sounds incredibly good for what it is.