Precedent Kingpin Bushings

DaveMJ · 05-03-2022, 07:57 PM

I've installed a number of sets of Kingpin Bushings on DS's and bought an adjustable reamer that has worked fine.

I need to install some on a 2010 Precedent, the 2010 Maintenance Manual does not say anything about reaming them.

Do I need to ream them? If yes to what dimension - 0.75" like a DS?

Cartmaster · 05-03-2022, 10:06 PM

On all the precedents I have replaced them on, I have not had to ream them out as yet but i use OEM parts. But if tight, use kingpin as a guide to size required.

05-03-2022, 07:57 PM	#1
DaveMJ Gone Wild Join Date: Nov 2018 Location: North Carolina Posts: 444	Precedent Kingpin Bushings I've installed a number of sets of Kingpin Bushings on DS's and bought an adjustable reamer that has worked fine. I need to install some on a 2010 Precedent, the 2010 Maintenance Manual does not say anything about reaming them. Do I need to ream them? If yes to what dimension - 0.75" like a DS?

05-03-2022, 10:06 PM	#2
Cartmaster British born Nincompoop Join Date: Feb 2007 Location: United Kingdom Posts: 2,498	Re: Precedent Kingpin Bushings On all the precedents I have replaced them on, I have not had to ream them out as yet but i use OEM parts. But if tight, use kingpin as a guide to size required.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
RXV replace kingpin bushings	Electric EZGO
Precedent Front Bushing Install Issue - Bushings too wide for clevis and kingpin	Electric Club Car
Precedent Bushings	Electric Club Car
DS same leaf spring bushings as precedent?	Gas Club Car
'04 Precedent Spindle Bushings	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum