|
|
|||||||
| Gas Club Car Gas DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
11-27-2013, 09:12 AM
|
#1 |
|
Not Yet Wild
Join Date: Nov 2013
Location: Inkster, michigan
Posts: 40
|
how do you get the front cover off a DS
I need to take my 94 club Ds front body off can you give me the steps to do this it looks like it slides into the alum. trim that goes around the dash. if you have a pic of the screws that hold it that would help thanks.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
11-27-2013, 09:59 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,862
|
Re: how do you get the front cover off a DS
There are 4-6 small common slotted screws holding the aluminum trim on. They are accessible from the in and back side of the trim. They screw into little sliding nuts in the trim piece. Removal is easier than re-installing.
|
|
|
|
|
11-27-2013, 10:03 AM
|
#3 | |
|
Gone Wild
Join Date: Aug 2009
Posts: 14,246
|
Re: how do you get the front cover off a DS
Quote:
 Loosen them just enough so the trim piece is not tight against the cowl...  |
|
|
|
|
|
11-27-2013, 10:19 AM
|
#4 |
|
ΜΟΛΩΝ ΛΑΒΕ
Join Date: Nov 2012
Location: West Virginia
Posts: 4,094
|
Re: how do you get the front cover off a DS
I agree with Jake and Scotty. You'll also want to remove the front bumper via the two bolts you can see sticking through it, they have a Phillips head and the nut on the back is 7/16 or 1/2, I don't remember exactly which. Once the front bumper is removed you'll see two black plastic retainers holding the body to the top of the bumper bracket. These may or may not be broken, I think they are there to allow the body to flex and not break in an impact. I usually replace them with short bolts when I put the body back on.
|
|
|
|
|
11-28-2013, 11:19 PM
|
#5 |
|
Call me Rich
Join Date: Mar 2011
Location: Western NY
Posts: 1,159
|
Re: how do you get the front cover off a DS
Don't worry if you take the aluminum trim piece completely off. I just use some rtv silicone to hold those sliding nuts in place. Very easy.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| FS: EZGO 2001.5-up Front Axle Cover | Golf Carts and Parts | |||
| WTB: Front Shock Cover Marathon | Golf Carts and Parts | |||
| front cover for ezgo | Golf Carts and Parts | |||
| plastic front suspension cover rubbing on 04 txt | Electric EZGO | |||
Linear Mode
