Stupid question shunt or sepex

Joatmony2k · 07-12-2018, 06:36 AM

I’m learning and have seen this a lot and was wondering or these the same type motors? Also witch ones have a speed switch on them?

I’m asking this to better understand the difference. I seen the pic of series and sepex but I see some refer to a shunt motor.

Sent from my iPhone using Tapatalk

LukeL · 07-12-2018, 06:43 AM

Sepex is another term for a Shunt wound motor. Thy are often called “Sepex”, “Shunt wound”, or “Regen” motors. They all have speed sensors on the end.

A Series motor has no speed sensor and is driven by a totally different system.

Club Car DS driver’s club #59

LukeL · 07-12-2018, 06:45 AM

BTW if your cart is a PDS it’s a Sepex motor.

Club Car DS driver’s club #59

Joatmony2k · 07-12-2018, 07:01 AM

Ok I have a 2002 ezgo freedom PDS and my motor has small winding like the pic shows but does not have a speed switch. It has two big bolts and two small bolts on the motor nothing else.

Sent from my iPhone using Tapatalk

LukeL · 07-12-2018, 07:06 AM

That might be a DCS motor then? Is your forward and reverse switch on the dash?

Club Car DS driver’s club #59

scottyb · 07-12-2018, 07:15 AM

DCS was the worlds first production Separately Excited golf cart drive system aka Sepex drive. Released in 1995 the motor had no speed sensor or wires from the tail shaft to track motor rpms.
PDs was introduced in 2000. This system incorporated a motor speed sensor which counted rpms and sent that information to the speed controller.

Alltrax aftermarket speed controllers came out about the same time as the PDS cart. These controllers for sepex drive were called DCX. These controllers did not monitor motor rpm. Often the motor wire harness was coiled up or removed.

Joatmony2k · 07-12-2018, 07:30 AM

Quote:

Originally Posted by LukeL

That might be a DCS motor then? Is your forward and reverse switch on the dash?

Club Car DS driver’s club #59

Yes

Sent from my iPhone using Tapatalk

LukeL · 07-12-2018, 07:31 AM

You must have an aftermarket controller that doesn’t use a speed sensor. Read what ScottyB just wrote. He knows this stuff better than most of us!

Club Car DS driver’s club #59

Joatmony2k · 07-12-2018, 07:49 AM

Quote:

Originally Posted by LukeL

You must have an aftermarket controller that doesn’t use a speed sensor. Read what ScottyB just wrote. He knows this stuff better than most of us!

Club Car DS driver’s club #59

It did have a Altrax DCS300 on it that I bought that way. And I’m going with a Navitas now and just want to make sure before I get the wrong one.

Sent from my iPhone using Tapatalk

LukeL · 07-12-2018, 07:57 AM

There’s your answer then [emoji4] you need a Sepex controller.

Club Car DS driver’s club #59

07-12-2018, 06:36 AM	#1
Joatmony2k Getting Wild Join Date: Oct 2016 Posts: 78	Stupid question shunt or sepex I’m learning and have seen this a lot and was wondering or these the same type motors? Also witch ones have a speed switch on them? I’m asking this to better understand the difference. I seen the pic of series and sepex but I see some refer to a shunt motor. Sent from my iPhone using Tapatalk
Joatmony2k Getting Wild Join Date: Oct 2016 Posts: 78

07-12-2018, 06:43 AM	#2
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Stupid question shunt or sepex Sepex is another term for a Shunt wound motor. Thy are often called “Sepex”, “Shunt wound”, or “Regen” motors. They all have speed sensors on the end. A Series motor has no speed sensor and is driven by a totally different system. Club Car DS driver’s club #59

07-12-2018, 06:45 AM	#3
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Stupid question shunt or sepex BTW if your cart is a PDS it’s a Sepex motor. Club Car DS driver’s club #59

07-12-2018, 07:01 AM	#4
Joatmony2k Getting Wild Join Date: Oct 2016 Posts: 78	Re: Stupid question shunt or sepex Ok I have a 2002 ezgo freedom PDS and my motor has small winding like the pic shows but does not have a speed switch. It has two big bolts and two small bolts on the motor nothing else. Sent from my iPhone using Tapatalk
Joatmony2k Getting Wild Join Date: Oct 2016 Posts: 78

07-12-2018, 07:15 AM	#6
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: Stupid question shunt or sepex DCS was the worlds first production Separately Excited golf cart drive system aka Sepex drive. Released in 1995 the motor had no speed sensor or wires from the tail shaft to track motor rpms. PDs was introduced in 2000. This system incorporated a motor speed sensor which counted rpms and sent that information to the speed controller. Alltrax aftermarket speed controllers came out about the same time as the PDS cart. These controllers for sepex drive were called DCX. These controllers did not monitor motor rpm. Often the motor wire harness was coiled up or removed.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-12-2018, 07:06 AM	#5
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Stupid question shunt or sepex That might be a DCS motor then? Is your forward and reverse switch on the dash? Club Car DS driver’s club #59

07-12-2018, 07:31 AM	#8
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Re: Stupid question shunt or sepex You must have an aftermarket controller that doesn’t use a speed sensor. Read what ScottyB just wrote. He knows this stuff better than most of us! Club Car DS driver’s club #59

07-12-2018, 07:57 AM	#10
LukeL Gone Wild Join Date: Jun 2017 Location: Savannah, GA Posts: 6,539	Stupid question shunt or sepex There’s your answer then [emoji4] you need a Sepex controller. Club Car DS driver’s club #59

Similar Threads
Thread	Forum
sepex controler question	Extreme DC!
Sepex Motor Question	Electric EZGO
Stupid question ( I think )	Gas EZGO
Stupid question	Electric Club Car