|
12-09-2008, 02:22 PM
|
#1 |
|
Gone Wild
Join Date: Oct 2008
Location: Austin/Willis, Texas
Posts: 627
|
1996 Cc...?
Hey guys, i was just wondering what the pros and cons of a 1996 CC. Im wanting to build a hunting buggy so a lift, new motor, controller...pretty much all electrical is going to be redone. are these parts easy to find for a 1996? what else would i have to change on this year model?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
12-09-2008, 02:43 PM
|
#2 |
|
A-DMIN
Join Date: Sep 2008
Location: Lake Buena Vista, Florida
Posts: 626
|
Re: 1996 Cc...?
if you have a 48 volt you can do alot if you get a 36v resisitor you can't do much but YES there are alot of parts just visist a site sponsor
|
|
|
|
|
12-10-2008, 12:41 AM
|
#3 |
|
Gone Wild
Join Date: Oct 2008
Location: Austin/Willis, Texas
Posts: 627
|
Re: 1996 Cc...?
what year was the last year that Club Car did resistor carts?
|
|
|
|
|
12-10-2008, 03:05 AM
|
#4 |
|
A-DMIN
Join Date: Sep 2008
Location: Lake Buena Vista, Florida
Posts: 626
|
Re: 1996 Cc...?
they did them up to like 03 but if you have a 48 volt you have most likley have a controller but if you have a 36V you most likley have resistor cart, look under your cart behind the batteries if you have some spring looking things you have a resistor or count how many water fill holes on top of the battery 3 fill holes 36 volt 4 fill holes 48 volt
|
|
|
|
|
12-10-2008, 02:06 PM
|
#5 |
|
The Last Moja Morani
 Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1996 Cc...?
1996 48 volt cart make sure you change the controller as the stock ones are crappy, new motor good idea if this is going to be a hunting buggy i suggest you go with the D&D stealth stalker motor than just upgrade everything else to heavy duty put a 6 inch lift on it and swap out all 6 gage cables to 4 gage i mean all cables not just battery cables............................................ .
 |
|
|
|
|
12-10-2008, 02:15 PM
|
#6 |
|
Gone Wild
Join Date: Oct 2008
Location: Austin/Willis, Texas
Posts: 627
|
Re: 1996 Cc...?
ok well now the guy is saying that its a 94 36 volt, that mean its a resistor? and if it is a resistor could i just change everything out and make it work with a controller? i mean since i will be putting an aftermarket controller on it anyways
|
|
|
|
|
12-10-2008, 02:21 PM
|
#7 |
|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 1996 Cc...?
well a 94 could still be a controller cart look for a box about 4inches by 8 inches by about 3 inches high if its a resistor cart you,ll see the coils behind the batteries if no coils its a controller.......to swap from resistor to controller isn,t cheap so if it is a resistor cart you might want to think about selling it and putting money towards a controller cart.............check the stickies up top there should be diagrams that will show you the difference for what to look for.......good luck and enjoy........................................
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Cushman UTV Max 1996 (maybe) | Electric golf carts | |||
| 1996 Club Car | Electric Club Car | |||
| 1996 Ez-go Dcs Problems | Electric EZGO | |||
| 1996 ez-go | Electric EZGO | |||
| 1996 club car | Electric Club Car | |||
Linear Mode
