|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-30-2013, 02:57 PM | #5991 |
Not Yet Wild
Join Date: Jun 2013
Location: Columbus, ohio
Posts: 1
|
Re: What did you do to/for your EZGO today?
Replaced control box w/rebuild box & replaced ignition cut out, went for one mile test drive. all is well!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-30-2013, 09:33 PM | #5992 |
Gone Wild
Join Date: Feb 2010
Posts: 551
|
Re: What did you do to/for your EZGO today?
I took the 91 Marathon Electric for a 3 hour drive around the farm and I took some pictures.
|
07-01-2013, 10:41 AM | #5993 | |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,215
|
Re: What did you do to/for your EZGO today?
Quote:
And...you will need that Giligan's island song "a three hour tour" to repeat over and over as you go along...... |
|
07-01-2013, 11:56 AM | #5994 |
Gone Wild
Join Date: Oct 2010
Location: Lawrenceburg Ky.
Posts: 1,771
|
Re: What did you do to/for your EZGO today?
Making a trailer out of a 91 ezgo for my workhorse.
|
07-02-2013, 08:55 PM | #5995 |
Getting Wild
Join Date: Jul 2012
Location: Vermilion
Posts: 146
|
Re: What did you do to/for your EZGO today?
Finally installed the disc brakes on my EZgo, noticed that the rear springs seem to be flat, no bow to them at all, rear seat and 4 in lift, is this normal, it's a 3 leaf spring set up... I have new HD 4 leaf ordered thru one of the sight sponsers. Is the 3 leaf stock or part of the lift kit it came with>?????? pics to follow soon..
|
07-03-2013, 12:16 PM | #5996 |
Gone Wild
Join Date: Aug 2010
Posts: 183
|
Re: What did you do to/for your EZGO today?
Technically not mine, but installed some salemans names on 30 new ez go's our dealership just bought. Hard to look at all them shiny new carts.....
|
07-03-2013, 12:54 PM | #5997 |
Gone Wild
Join Date: Dec 2008
Location: Summerville, SC
Posts: 331
|
[QUOTE=SpoiledRotten;, what did you do to/for your cart today?[/QUOTE]
Sent from my XT907 using Tapatalk 2 |
07-10-2013, 11:02 AM | #5998 |
Not Yet Wild
Join Date: Aug 2010
Location: Indiana
Posts: 38
|
Re: What did you do to/for your EZGO today?
Jake's Front Hydraulic Disk Brakes To Whoa Up The 48V PDS Conversion. Lovin It!
|
07-16-2013, 08:39 PM | #5999 |
Getting Wild
Join Date: Sep 2012
Location: Central FL
Posts: 84
|
Re: What did you do to/for your EZGO today?
Installed a flip rear seat on the RXV. Had to fabricate a couple of parts. The OEM uprights for the driver's seat had been swapped out when a dump cart was added. Had to weld up some brackets and extend the included box channel. Nothing too complicated, but more than doubled the installation time.
A week ago I swapped out the stock springs for OEM heavy duty ones to deal with the added weight of two more passengers. Dirty job, but easy. |
07-18-2013, 07:32 PM | #6000 |
Not Yet Wild
Join Date: Jul 2013
Location: SoCal
Posts: 60
|
Re: What did you do to/for your EZGO today?
Bought Jake's lift kit. Got the 400amp charge controller and resistor today - rear seat and 4 gauge cables should be here Monday. Hope to find a good set of 22's next week & start putting it all together!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
got another cart today | Gas EZGO | |||
New toy came today!!! | Big Block Talk! | |||
I took apart my front end today. | Lifted Golf Carts |