|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-19-2011, 11:56 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Cicero, IN
Posts: 16
|
Upgrading motor,controller and solenoid
What's the best motor controller setup to get for my 98 txt 36 volt with a 6 inch lift and 23" tires I want to go about 30 mph
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-19-2011, 12:09 PM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Upgrading motor,controller and solenoid
30mph huh?
8/6v batteries (48v) 500 amp speed control 400 amp Solenoid 10 pcs 2 g cable set PQ Assassin motor Have you thought about how you are going to stop it? |
|
|
|
|
05-19-2011, 01:04 PM
|
#3 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Cicero, IN
Posts: 16
|
Re: Upgrading motor,controller and solenoid
Well who needs to stop Haha how much will all that cost me and where can I buy it
|
|
|
|
|
05-19-2011, 01:12 PM
|
#4 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: Upgrading motor,controller and solenoid
All that would run about $1200 You can get it at http://cartsunlimited.net/ or by calling 951-461-9626 or contacting any one of the site sponsors here at BGW.
 |
|
|
|
|
05-19-2011, 01:52 PM
|
#5 |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Upgrading motor,controller and solenoid
Do you have the lift and large tires installed already?
If so what speed do you get out of it now? It would be substantially cheaper if you lowered your sights from 30mph to 25mph. |
|
|
|
|
05-19-2011, 02:15 PM
|
#6 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Cicero, IN
Posts: 16
|
Re: Upgrading motor,controller and solenoid
its already lifted with the tires and I cant settle with 25 unless it was a lot less
|
|
|
|
|
05-19-2011, 03:04 PM
|
#7 |
|
Gone Wild
Join Date: Mar 2009
Location: Roseville, CA
Posts: 2,757
|
Re: Upgrading motor,controller and solenoid
What speed do you get out of it now?
Does it have the stock controller and cables? Is it a series cart or a DCS cart? |
|
|
|
|
05-19-2011, 04:07 PM
|
#8 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Cicero, IN
Posts: 16
|
Re: Upgrading motor,controller and solenoid
It's a stock series motor and controller and I'm getting about 18 mph
|
|
|
|
|
05-19-2011, 04:30 PM
|
#9 |
|
Gone Wild
Join Date: Jan 2011
Location: Camino, CA.
Posts: 300
|
Re: Upgrading motor,controller and solenoid
18 MPH with 23's and 12.44:1 ? That's 3200 RPM. Is that correct for a '98?
Anyway, at 30 MPH YOU NEED BRAKES! Don't be confused by those things on the back now, THEY WILL NOT DO! I just added the 4 wheel disk brakes as with the new motor and 18" tires, I will be an easy 28 MPH on flat ground. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Controller, Solenoid, Motor...not sure | Electric EZGO | |||
| Upgrading Controller and Motor | Electric Club Car | |||
| First time upgrading controller&motor. Need help with alltrex | Lifted Golf Carts | |||
| Upgrading my controller,,which one?? | Extreme DC! | |||
| Don't want to fry new motor/controller/solenoid | Electric Club Car | |||
Linear Mode
