lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-22-2011, 05:54 PM   #1
rhinodad
Not Yet Wild
 
rhinodad's Avatar
Harley Davidson
 
Join Date: Aug 2011
Location: bhc arizona
Posts: 38
Default need help to identify cc gas engine

i need help to identify the engine in my golf cart........
the golf cart is a harley davidson 1973...... but someone started to transplant a club car engine in it... i know what were they thinking......
i know the engine is a overhead valve motor... and it turns counter clockwise...
is it a fe 350 cc???? is there any serial numbers stamped on the engine????
if there was a decal on it...its gone now.......
please help me........
also does anyone have a carburator????
rhinodad is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-22-2011, 08:32 PM   #2
ckiguy
Bad *** Speller!
 
ckiguy's Avatar
Club Car
 
Join Date: Oct 2009
Location: Columbus, Ohio
Posts: 1,338
Default Re: need help to identify cc gas engine

Quote:
Originally Posted by rhinodad View Post
i need help to identify the engine in my golf cart........
the golf cart is a harley davidson 1973...... but someone started to transplant a club car engine in it... i know what were they thinking......
i know the engine is a overhead valve motor... and it turns counter clockwise...
is it a fe 350 cc???? is there any serial numbers stamped on the engine????
if there was a decal on it...its gone now.......
please help me........
also does anyone have a carburator????
yes thereis a serial number on it and ruffly a date on it. look on the fan side of the engine you should see 2 white stickers. one will have a bar code and some numbers like fe350 as10 some thing like that, that isthe model number sticker. thereis also a epa sticker on it with a bunch of mumbo jumbo. this will or should have the dom or date of manufacture. you will notice this cause it has the kawaski name.logo onit. both are on the fan side, and should both be on the black metal housing, the black plastic if you have it is a club car part.
ill try to post some pic on here if phone is working wth me tonight!
ckiguy is offline   Reply With Quote
Old 08-22-2011, 08:55 PM   #3
ckiguy
Bad *** Speller!
 
ckiguy's Avatar
Club Car
 
Join Date: Oct 2009
Location: Columbus, Ohio
Posts: 1,338
Default Re: need help to identify cc gas engine

the photo with the bar code is the model number of the engine. the pic without the bar code is the epa label. it has the date of manufacture on it. as long as other info. the epa sticker is on the fan side at ruffly the 1 to 2 oclock postion. the model number is on the face at ruffly the 10 oclock postion. hope this helps.
Attached Images
File Type: jpg 0822112136.jpg (137.1 KB, 7 views)
File Type: jpg 0822112137.jpg (194.6 KB, 6 views)
ckiguy is offline   Reply With Quote
Old 08-23-2011, 07:04 AM   #4
rhinodad
Not Yet Wild
 
rhinodad's Avatar
Harley Davidson
 
Join Date: Aug 2011
Location: bhc arizona
Posts: 38
Default Re: need help to identify cc gas engine

there is no labels on the fan housing anywhere.....
is there any other way of identifying this engine????
also thanks for replying.....:)
rhinodad is offline   Reply With Quote
Old 08-23-2011, 07:33 AM   #5
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,503
Default Re: need help to identify cc gas engine

Welcome to BGW rhinodad!

This is just a guess... but, most likely you have an FE290,
They were the most common from 92 to 96 (counter clockwise rotation)

The counter clockwise FE350 was only used in a few select carts in 95 and 96, and are "few and far between"
then the rotation changes to clockwise in 97.

I was told that there is a casting of the engine size on the back, top of the crankcase, somewhere below the starter/generator.
But, I have yet to find it on my 07 FE350, nor, have I seen it on my buddies 94 FE290!

I may not have been much help, but, let us know what you find, if you find it!

lockman1 is online now   Reply With Quote
Old 08-23-2011, 07:38 AM   #6
rhinodad
Not Yet Wild
 
rhinodad's Avatar
Harley Davidson
 
Join Date: Aug 2011
Location: bhc arizona
Posts: 38
Default Re: need help to identify cc gas engine

thanks.... i will check it out when i get home today...
rhinodad is offline   Reply With Quote
Old 08-23-2011, 06:03 PM   #7
rhinodad
Not Yet Wild
 
rhinodad's Avatar
Harley Davidson
 
Join Date: Aug 2011
Location: bhc arizona
Posts: 38
Default Re: need help to identify cc gas engine

well i pulled all the tins off the engine.......no luck!!!!!!
started cleaning it up some more and found at the motor mounting pad at the rear of the engine next to the oil drain.......fe290.....
so i guess thats it......no serial #??????
rhinodad is offline   Reply With Quote
Old 08-24-2011, 05:51 AM   #8
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,503
Default Re: need help to identify cc gas engine

I'm glad you found it, and thanks for the follow up! (after 7 years, I finally know where to look now!)

And no... they don't cast, or stamp the serial number on their engines,
they only put it on the tag, and attach it to the engine shroud at final assembly. (which you don't have)
You don't really need the serial number anyways, all you is the need the model number to get the proper parts for it.

But at least now you know that you have a counter clockwise FE290, built between 1992 and 1996!

Now... get yourself a carburetor and get that HD-CC running!



Oh yeah... Don't forget... Here at BGW, We love pics!
Attached Images
File Type: jpg 001 (2).JPG (55.4 KB, 4 views)
lockman1 is online now   Reply With Quote
Old 08-24-2011, 07:17 AM   #9
rhinodad
Not Yet Wild
 
rhinodad's Avatar
Harley Davidson
 
Join Date: Aug 2011
Location: bhc arizona
Posts: 38
Default Re: need help to identify cc gas engine

wow...that decal would have made life much easier.....

i know the 290 is the cc,s..... what is the fe...does that mean its a counter clockwise motor??????
or does the F mean forward facing cylinder and the E mean cc motor.....
sorry for all the questions....just trying to figure it all out.....

and i will get some picts up soon.............:)
rhinodad is offline   Reply With Quote
Old 08-24-2011, 07:33 AM   #10
lockman1
What the ....?
 
lockman1's Avatar
Club Car
 
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 13,503
Default Re: need help to identify cc gas engine

Don't worry about what the FE stands for... Kawasaki makes a bunch of different engines, for different applications,
but, just remember the FE and rotation when getting parts!

lockman1 is online now   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
trying to identify Electric EZGO
How do I identify age? Gas Yamaha
Help identify this?? Side x Sides-ATV-Quads-Bikes-Jeeps-4x4's!
identify my ez-go Gas EZGO
Can someone identify what is up in this pic? Gas EZGO


All times are GMT -5. The time now is 07:29 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.